HomeMy WebLinkAboutB17-0723 CALFIRE PRE INSPECTIONButte County Fire Department
Fire Prevention Bureau
]76 Nelson Avenue,Oroville CA 95965
(530)538-7888 Office,(530)538-2105 Fax
Applicant Name:RONALD HATFIELD
Permit Address:286 MELROSE DR,OROVILLE,CA 95965
Phone:SCOTT-530-533-8800
Cell:
Permit #817-0723
APN #068-347-003
Under authority of Public Resources Code (PRC)Section 4290 and 4291,Butte County Improvement Standards (BCIS),
California Building Code (CBC),and the California Fire Code (CFC),and Chapter 38A Butte County Code,the following
items are required by CAL FIRE/Bulte County Fire Department for all development located within the State and Local
Responsibility Areas of Butte County and are required as part of this permit.These requirements are minimums and may be
superseded by Butte County local regulations exceeding these standards.
Tills pre inspection is for:
Df Residence
Q Addition to existing structure
Public Resources Code 4290
ADMINISTRATION
•Manufactured Home
• Ancillary Building (detached garage, shop, shed, etc.)
1272.00 Maintenance of Defensible Space Measures
0 To ensure continued maintenance of properties in conformance with these standards and measures and to assure
continued availability, access, and utilization of the defensible space provided for these standards during a wildfire,
provisionsfor annual maintenanceshall be includedinthe developmentplans and/orshall beprovided as a condition of the
permit, parcel or map approval.
DRIVEWAY STANDARDS
1273.10 Driveways
(a) All new driveway construction or an extension of an existing driveway shall comply with Public Resources Code
4290 roadway requirements.Driveways can only serve a single parcel.
Length of Driveway
(b) Alldrivewaysshall provide a minimum 10 foottraffic laneand unobstructedvertical clearanceof 15feet along its
entire length.
1273.02 Driveway Surface
'The surface shall provide unobstructed access to conventional drive vehicles,including sedans and fire engines.
urfaces should be established in conformance with local ordinances,and be capable of supporting a 40,000 pound load. 4"
of class 2 aggregate base shall be required for all driveways,turnouts and turnarounds.
1273.03 Driveway Grades
The grade forall drivewaysshall not exceed 15%withoutbeing paved. Gradesover 15%shall have4"of class2
aggregatebase and2" ofasphalt concrete.No drivewaysallowed in excess of 20%.
1273.04 Driveway Radius
(a)No roadway shallhavea horizontal insideradiusof curvature of lessthan50 feetand additional surfacewidthof4
feet shall be added to curves of 50-100 feet radius;2 feet to those Ifom 100-200 feet.
(b) The lengthof verticalcurves inroadways,exclusive of gutters,ditches, anddrainage structuresdesignedto hold or
divert water,shall be not less than 100 feet.
1
Legend:N/A=Not Applicable,X=Requircd
Revised on 04/10/17
Trakit Copy